Whether you’re a first-time fridge buyer or looking for a model suits best to your purpose, the first thing you have to find if the model fits properly to your space or not! It can save you from future problems by measuring a few things at the beginning.

Select the Spot First:
According to our fridge repair experts in Prospect, you have to select a place that is far from the direct sunlight. Even, the fridge should be away from the microwave and oven, as they produce heat too.

How to Measure Space for the Fridge?

It can be a problematic situation when you try to fit a bigger unit into an existing opening. The space required around your unit is necessary for proper ventilation of the compressor unit. Though, some integrated or built-in refrigerator comes up with a dedicated open space with grilling that allows proper ventilation for the compressor.

How to Measure Space for Your Fridge?

The leaving gap between the refrigerator and the side walls will allow sufficient heat rejection. If there is sufficient airflow near the condenser coils. According to Whirpool manufacturers, there is a recommended gap of 20mm space from each side. However, the minimum clearance gap our fridge repair experts in Kellyville recommend is –

Sides: There should be 1/2′” to 1′” of clearance gap between the walls and cabinetry.

Rear: There should be minimum of 1′” and preferably 2′” of the gap of clearance. Our fridge repair experts in Sydney recommend this for water and electrical connection. This is the ideal to push the fridge out from the wall.

Top: A minimum of 1/2′” inch or preferably you can keep 1′” clearance space at the top of the fridge.

Why Is It Necesary to Put Gap for the Refrigerator?

Previously, the refrigerator coils were installed at the rear part of the fridge. So, if the fridge models were kept maintaining a gap, it allows the heat to dissipate.

However, in modern refrigerator units, the coils are located below that pulls the colder air inside, as soon the coils and components get hotter. And, the warm air travel across the rear part of the fridge. However, a fridge without proper ventilation shows a few symptoms over the span. Especially if the compressor runs at a high temperature for a prolonged period of time, it will not only cause poor cooling but also cause the compressor sound loud following noise and vibrations. It indicates not only compressor issue but also causes the component failure.

Try to keep the front grill of your unit clean to ensure the optimal performance of the fridge. According to our fridge repair experts in Sydney Eastern Suburbs, the ideal humidity of the home should be between 35-50%, since the humidity above 50% can cause condensation buildup. Moreover, an ideal temperature for a fridge to operate is between 60-80 degrees Fahrenheit. Don’t forget to prevent the direct sunlight from coming with better curtain and sunlight-resistant windows.

Description: Want to make sure the fridge works well in optimal condition? Know how the gap between sidewalls and fridge impacts the performance of the cooling unit.