You opened your refrigerator, take out what you require, closed the door, but when you come back later, you get to see a gap. The door wasn’t fully closed! As a result, there will be a lack of cooling. Today most of the commercial as well as residential fridge owners face this frustrating situation, which is not hard to fix if professionals for fridge repairs in Merrylands are there. Find the discourse below from our experts to be aware of such issues –

You might have checked that there is nothing inside to push the refrigerator door, but there is still a problem in proper closer. What’s the reason? Find it in detail –

1. Too Much Weight in the Door:

Upon storing the heavy items like gallons, juice or milk with a heavy container can create an excess weight. It pulls the door outside that won’t let the fridge door keep shut.

2.Lack of Levelling:

If the front part of the fridge is tilted forward a bit, the doors won’t stay closed. So, don’t forget to do level check and adjust the feet accordingly.

3.Misaligned Hinges:

A lot of strain on your fridge’s hinges can pull the door outward. Call fridge repair professional in Kellyville to tighten and adjust the hinges. It involves loosening the hinge and realigning to its proper placement. However, this process can vary from model to model. So, be sure to check the instruction manual.

4. Check the Seal:

The seal around the refrigerator or freezer door is also called a gasket. It blocks the cool air inside the fridge and allows proper cooling of food. Malfunctioning seal causes unsafe temperature that increases the electricity bill, as your fridge will work hard to keep the unit and stored items cool.

It’s a strip of rubber that fits the door tightly at the edge. At times the gasket wiggles will lose the grove, and that needs to be pushed back in. Use petroleum jelly into the groove underneath the loose rubber. In this way, it will be easy to push the rubber. To test if the door gasket fits properly, place the dollar bill in the refrigerator door and find whether the bill is sticking out of the fridge or not. If the bill comes out, then the seal isn’t tight enough, which is likely to be replaced.

5. Clean the Gasket:

At times, the fridge door will pop open on its own. It can happen due to dirty seal. Though fridge repairs in Bella Vista is an inevitable part to fix this issue, you can clean it too with a few steps. Dip an old toothbrush into the mixture of dish wash liquid scrub the dirt out from gasket. However, proper cleaning is required to stop the area from attracting dirt and germ on a frequent basis.

Lastly, check inside of the refrigerator to make sure there aren’t any food containers, open crisper or misaligned shelves that are keeping the door from closing properly.